TB Type Rubber Oil Seals 50mm Rubber Lip Seals Automotive
High Performance Automotive TB Seal TB Type Rubber Seals Introduction: TB seal has same type with the TC type oil seals. The different of them is: For TC oil seal, the rubber is completely coated in the Skeleton. But for TB type seals, the rubber is only partly coated in the seals. Both of the T...
High Performance Automotive TB Seal TB Type Rubber Seals
Introduction:
TB seal has same type with the TC type oil seals. The different of them is:
For TC oil seal, the rubber is completely coated in the Skeleton. But for TB type seals, the rubber is only partly coated in the seals. Both of the TC and TB seals has self lightening spring and double rubber lips. The function of them is same in the Transmission systems.
Features of Rubber:
Material Temperature( ℃ ) Advantage
NBR -40~+125 Excellent abrasion resistance, Mineral oil resistant.
SIR -60~+225 Excellent heat resistance, cold resistance and weatherability.
FKM -20~+250 Have good heat resistance, oil resistant and chemicals resistance.
EPDM -40~+125 Water resistance, resistance to polarity, solvent resistance, inorganic drug resistance, and good weatherability.
SBR -50~+100 Resistance to polarity, solvent resistance, Excellent resistance to water
PTFE -45~+100
Heat resistance, Excellent cold resistance, chemicals resistance, goodweatherability, Low friction coefficient of oil seal material
Should oil seals be installed dry?
Proper seal set up is usually disregarded whilst deciding on an oil or grease seal for any given application. To start the seal set up, an crucial step is to pre-lubricate the seal with the oil or grease you will seal. This will lessen the “sliding“ friction pressure which could harm the seal whilst set up dry. It additionally prevents a dry beginning circumstance which could tear the seal cloth for the duration of preliminary run-in periods.
Product Details:
Materials: Nitrile Rubber(NBR), Viton rubber(FKM), ACM, HNBR and etc.
Other Names: TC rubber seal, Oil sealing, Rubber seal, FB oil seal, Hub oil seals, Wheel end seals, Auto Engine seals, rubber seals, Rubber sealing.
Operating temperature: NBR -40 – 120 °C ; FKM -20 – 250 °C
Color: Black, Brown, Red, Blue
Hardness: Shore A 40 -80
Pressure: up to 0.03 MPa
Application: Low and high temperature resistant Wheel end hub seals are used for Man trucks, Sino trucks, Donfeng Trucks and other heavy trucks.
Product Features:
Performs excellent under gas and water.
Good sealing effect in Dynamic and static sealing.
Excellent chemical corrosion
Excellent ozone resistance
Anti-aging, wear resistant
Introduction:
TB seal has same type with the TC type oil seals. The different of them is:
For TC oil seal, the rubber is completely coated in the Skeleton. But for TB type seals, the rubber is only partly coated in the seals. Both of the TC and TB seals has self lightening spring and double rubber lips. The function of them is same in the Transmission systems.
Features of Rubber:
Material Temperature( ℃ ) Advantage
NBR -40~+125 Excellent abrasion resistance, Mineral oil resistant.
SIR -60~+225 Excellent heat resistance, cold resistance and weatherability.
FKM -20~+250 Have good heat resistance, oil resistant and chemicals resistance.
EPDM -40~+125 Water resistance, resistance to polarity, solvent resistance, inorganic drug resistance, and good weatherability.
SBR -50~+100 Resistance to polarity, solvent resistance, Excellent resistance to water
PTFE -45~+100
Heat resistance, Excellent cold resistance, chemicals resistance, goodweatherability, Low friction coefficient of oil seal material
Should oil seals be installed dry?
Proper seal set up is usually disregarded whilst deciding on an oil or grease seal for any given application. To start the seal set up, an crucial step is to pre-lubricate the seal with the oil or grease you will seal. This will lessen the “sliding“ friction pressure which could harm the seal whilst set up dry. It additionally prevents a dry beginning circumstance which could tear the seal cloth for the duration of preliminary run-in periods.
Product Details:
Materials: Nitrile Rubber(NBR), Viton rubber(FKM), ACM, HNBR and etc.
Other Names: TC rubber seal, Oil sealing, Rubber seal, FB oil seal, Hub oil seals, Wheel end seals, Auto Engine seals, rubber seals, Rubber sealing.
Operating temperature: NBR -40 – 120 °C ; FKM -20 – 250 °C
Color: Black, Brown, Red, Blue
Hardness: Shore A 40 -80
Pressure: up to 0.03 MPa
Application: Low and high temperature resistant Wheel end hub seals are used for Man trucks, Sino trucks, Donfeng Trucks and other heavy trucks.
Product Features:
Performs excellent under gas and water.
Good sealing effect in Dynamic and static sealing.
Excellent chemical corrosion
Excellent ozone resistance
Anti-aging, wear resistant