Cosmetic Bottle Extrusion Blow Molding Machine 2 Head 10ml Double Station
High Speed Double Station 2 Die Head Blow Molding Machine For Cosmetic Bottle SLBK series 1: the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, plating processing, not accumulating material, the material is more smooth. With t...
High Speed Double Station 2 Die Head Blow Molding Machine For Cosmetic Bottle
SLBK series
1: the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, plating processing, not accumulating material, the material is more smooth. With tie -bar design clamping unit,which is suitable for bulky mold.
2: plasticizing system: frequency conversion motor Hardened reducer with high quality nitride barrel screw, variable frequency speed control, energy efficient and stable yield.
3: electronic control system: the use of PLC man- machine interface, all parameters set, modify, retrieval can be seen as the operation, the system runs stable, accurate positioningIndeed.
4: application areas: food, medicine, petroleum, chemical, chemical, automotive, tools, toys and other industries.
5: can be equipped with automatic overflow device: supporting cutting device and pull the end device, automatic operation, save labor.
6 Note: When the temperature of the hopper and extrusion head doesn’t reach the set temperature, it is forbidden to do any operation like injection, plasticizing, and extraction. Although this machine is equipped with cold-start-prevention function, wrong setting of the temperature (too low) will damage the blow molding machine. So please operate with discretion.
SPECIFICATION SLBK-65
MATERIAL PE,PP,EVA,ABS,PS
MAX CONTAINER CAPACITY L 5
NUMBER OF DIE HEAD SET 1,2,3,4,6
OUPUT(DRY CYCLE) PC/HR 950x2
MACHINE DIMENSION (LxWxH ) MM 4000x2600x2200
TOTAL WEIGHT TON 7T
CLAMPING UNIT
CLAMPING FORCE KN 65
PLATEN OPENING STROKE MM 170-520
PLATEN SIZE(WxH) MM 300x400
MAX MOULD SIZE(WxH) MM 400x400
MOLD THICKNESS MM 175-250
EXTRUDER UNIT
SCREW DIAMETER MM 65
SCREW L/D RATIO L/D 25
MELTING CAPACITY KG/HR 70
BARREL HEATING POWER KW 15
NUMBER OF HEATING ZONE ZONE 3
EXTRUDER MOTOR RATED POWER KW 15
DIE HEAD
NUMBER OF DIE HEATING ZONE ZONE 2-5
POWER OF DIE HEATING KW 6
CENTER DISTANCE OF DOUBLE DIE MM 130
CENTER DISTANCE OF THREE DIE MM 80
CENTER DISTANCE OF FOUR DIE MM 60
CENTER DISTANCE OF SIX DIE MM 60
MAX DIE-PIN DIAMETER MM 260
POWER
MAX DRIVE POWER KW 26
TOTAL POWER KW 42
FAN POWER OF SCREW KW 2.4
AIR PRESSURE MPA 0.6
AIR CONSUMPTION M3/MIN 0.5
AVERAGE ENERGY CONSUMPTION KW 18.5
Cosmetic Bottle Extrusion Blow Molding Machine 2 Head 10ml Double Station 0
SLBK series
1: the mold head mechanism: the use of the split type of the head, not channeling material, more uniform, more uniform, plating processing, not accumulating material, the material is more smooth. With tie -bar design clamping unit,which is suitable for bulky mold.
2: plasticizing system: frequency conversion motor Hardened reducer with high quality nitride barrel screw, variable frequency speed control, energy efficient and stable yield.
3: electronic control system: the use of PLC man- machine interface, all parameters set, modify, retrieval can be seen as the operation, the system runs stable, accurate positioningIndeed.
4: application areas: food, medicine, petroleum, chemical, chemical, automotive, tools, toys and other industries.
5: can be equipped with automatic overflow device: supporting cutting device and pull the end device, automatic operation, save labor.
6 Note: When the temperature of the hopper and extrusion head doesn’t reach the set temperature, it is forbidden to do any operation like injection, plasticizing, and extraction. Although this machine is equipped with cold-start-prevention function, wrong setting of the temperature (too low) will damage the blow molding machine. So please operate with discretion.
SPECIFICATION SLBK-65
MATERIAL PE,PP,EVA,ABS,PS
MAX CONTAINER CAPACITY L 5
NUMBER OF DIE HEAD SET 1,2,3,4,6
OUPUT(DRY CYCLE) PC/HR 950x2
MACHINE DIMENSION (LxWxH ) MM 4000x2600x2200
TOTAL WEIGHT TON 7T
CLAMPING UNIT
CLAMPING FORCE KN 65
PLATEN OPENING STROKE MM 170-520
PLATEN SIZE(WxH) MM 300x400
MAX MOULD SIZE(WxH) MM 400x400
MOLD THICKNESS MM 175-250
EXTRUDER UNIT
SCREW DIAMETER MM 65
SCREW L/D RATIO L/D 25
MELTING CAPACITY KG/HR 70
BARREL HEATING POWER KW 15
NUMBER OF HEATING ZONE ZONE 3
EXTRUDER MOTOR RATED POWER KW 15
DIE HEAD
NUMBER OF DIE HEATING ZONE ZONE 2-5
POWER OF DIE HEATING KW 6
CENTER DISTANCE OF DOUBLE DIE MM 130
CENTER DISTANCE OF THREE DIE MM 80
CENTER DISTANCE OF FOUR DIE MM 60
CENTER DISTANCE OF SIX DIE MM 60
MAX DIE-PIN DIAMETER MM 260
POWER
MAX DRIVE POWER KW 26
TOTAL POWER KW 42
FAN POWER OF SCREW KW 2.4
AIR PRESSURE MPA 0.6
AIR CONSUMPTION M3/MIN 0.5
AVERAGE ENERGY CONSUMPTION KW 18.5
Cosmetic Bottle Extrusion Blow Molding Machine 2 Head 10ml Double Station 0