H6 Finished Ground K20 Tungsten Cabide Rods Polished Cemented Rods



Product Details:

Application: End mill/ Drills finished ground blanks

Diameter: Ø1.6- Ø40mm

Length: 330mm or cut-to-length

Circularity: 2μm-5μm

Straitness: 0.04-0.07

Surface roughness: Ra 0.02- Ra 0.4

Polished Cemented Tungsten Carbide Rod H6 Finished Ground K20 HRA 92.8 0Polished Cemented Tungsten Carbide Rod H6 Finished Ground K20 HRA 92.8 1



Solid finished ground carbide rods are usually used for making endmills, and drills. Ouqi can provide precision ground rods in which the circularity and straightness could be 0.02mm and surface roughness can be Ra 0.02. With advanced equipment, the capacity could be 10,000kgs per month for the finished ground rods.



General tolerance for the h6 finished ground solid carbide rods
Diameter Tolerance μm Length Tolerance Straightness Tolerance Circularity Tolerances
＜3.0 -6/0 ＜100.0 +0.5/+1.0 ＜4.0 0.07 <3,0 2,0 micron
3.0-6.0 -8/0 100.0-165.0 +1.0/+2.5 4.5-5.0 0.06 3,0- 6,0 2,5 micron
6.0-1.0 -9/0 165.0-335.0 +1.0/+6.0 5.5-12 0.05 6,1-10,0 3,0 micron
10.0-18.0 -11/0 ＞12.5 0.04 10,1-18,0 3,5 micron
18.0-30.0 -13/0 18,1- 30,0 4,0 micron
30.0-50.0 -16/0 30,1- 50,0 5,0 micron






Feature:

With high hardness and wear/corrosion resistance, suitable for the manufacturing of various kinds of solid cemented carbide tools for the machining of heat-resistant alloy and Ti alloy.
--Dimension: diameter from 3-40mm, length from 38-330mm;
--with one coolant hole or two coolant holes or without coolant holes;
--ground and unground;



Grades for tungsten carbide rods:



Grade ISO Code Grain size
μm Cobalt % Density
g/cm3 Hardness T.R.S
HV30 HRA N/mm2 KPSI
YF06 K05‐K10 0.5 6.0 14.90 1850 93.5 3800 553.9
YL10A K10‐K20 0.8 8.0 14.65 1780 92.8 4200 609.5
YL10.2 K20‐K30 0.8 10.0 14.42 1600 91.5 4000 580
XF30 K30‐K40 0.6 12.0 14.10 1700 92.5 4000 580




Recommended Application

Grade Application
YF06 Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based alloys, etc. It is recommended for making big PCB drills of ф3.2‐6.3mm, micro drills of ф0.8‐3.2mm, micro milling tools and reamers, etc.
YL10A It is suitable for machining cast iron, aluminum alloys, etc. also for machining common steels.
It is recommended for the drilling of cast iron and aluminum alloys.
YL10.2 It is suitable for machining common steel, cast iron, stainless steel, heat‐resistant steel, nickel-based alloys, titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc.
XF30 It is suitable for machining titanium alloy, heat‐resistant alloys, stainless steel, hardened steel, grey cast iron, glass‐fiber Reinforced plastics, composite materials, etc. It is recommended to make drills and milling tools, etc.


Polished Cemented Tungsten Carbide Rod H6 Finished Ground K20 HRA 92.8 2

Polished Cemented Tungsten Carbide Rod H6 Finished Ground K20 HRA 92.8 3Polished Cemented Tungsten Carbide Rod H6 Finished Ground K20 HRA 92.8 4