Three target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable
This device can be used for preparing single-layer or multi-layer ferroelectric thin films, conductive films, alloy films, semiconductor films, ceramic films, dielectric films, optical films, oxide films, hard films, PTFE films, and the like. Compared with similar equipment, this three-target magnetron sputtering coater is not only widely used, but also has the advantages of small size and easy operation, and is an ideal equipment for preparing material films in a laboratory.
Technical parameter
Supply Voltage VAC 220, 60Hz
UPS
20KVA 16KW, 1 hour delay
16 batteries, with capacity of 38AH
Vacuum Chamber Dimension: Dia. 325 mm * H 385 mm
Material: 304 stainless steel
Viewport (Window): ~4'' (100mm) with shutter
Sample Stage Top sample holder
Sample table: Dia. 150mm
Sample size: Max. 4'' diameter
Rotary speed: 0-40rpm adjustable
Heating temperature: up to 700oC

Water Chiller Water flow rate: 2.3m3/h
Power: 3P
Cooling Capacity: 8250Kcal/h
Compressor output power: 2.25KW
Magnetron Sputtering Gun 3× 2'' magnetron sputter guns, with automatic shutter
Sputtering orientation upwards
Target diameter: 2''
Magnets: rare earth magnet
RF Generator 3 × RF 300W power supply with auto match
Power output range: 5W~300W
Maximum reflected power: 100W
Power stability: ±0.1%
Harmonic component: ≤-50dbc
Power supply: Single phase 187-253 VAC, 50/60HZ
Efficiency: ≥70%
Power factor: ≥90%
Reflected power (at maximum power): <3W
Maximum load current: 30ARMS
Maximum load voltage: 7500VRMS
RF output connector: 50 Ω, L29 or customized
Match time: 1~3s
Real part range of matched impedance: 0~80Ω
Imaginary part range of matched impedance:﹣200j~ ﹢200j
Cooling method: forced cooling
Mass Flow Meter 3 × MFC mass flow control (Ar, O2 and N2)
Measuring ranges: up to 20sccm
With pneumatic isolation valve(s) and filter.
Full Automatic control by PC or PLC, to control Store for minimum 100 recipe
19'' Flat controller