Description of Spark Plasma Sintering System:
CY-SPS-20T is a Spark Plasma Sintering System is designed for a wide range of material research up to 1600ºC. It can be used for sintering, sinter-bonding, surface treatment, and synthesis. The sample material can be metals, ceramics, nanostructured material, and amorphous material. This system is perfectly fit solid electrolyte and electric thermal material research.

Specification of Spark Plasma Sintering System:
Configuration

·Stainless Steel Chamber - Suitable for Controlled Inert Gas or Vacuum Condition
·Sintering Press Unit
·Sintering DC Pulse Generator
·Vacuum Unit
·Sintering Control Unit
Power 20 KVA
Input Voltage AC220V 50/60 Hz Three Phases
Output Current DC 0 - 1500 A (Digital Controlled)
Output Voltage DC 0 - 10 V (Digital Control)
Pulse Frequency ·5 - 255 ms Adjustable
·2 - 1000 Hz adjustable
Maximum Temperature · 1200ºC with K-type thermal couple
· 1600ºC with B-type thermal couple
·Two types of thermal couple are included
Temperature controller

·Precision Eurotherm temperature controller is built in
·Overshoting temperature is less than 5ºC at the feast heating rate
·Temperature accuracy : < 0.1ºC
Hydraulic Presss

·Manual operated hydraulic press to apply pressure.
·Max pressure: 20 T
·Digital Pressure guage is built in with over-pressure alarm.
Sintering Die Set Dimension

·OD. 85- 100 mm diameter made of HIP graphite in Japan
·ID: 20 mm - 50 mm
·Sintered Sample size : 20 - 50 mm depended on sintering temperature.
·Made of high purity graphite by HIP processing, Max. Pressure for the die is 50 MPa, and Max. Load from the hydraulic press is dependent on die 's ID
o 0.5"ID Max. 0.5T
o 1.0 ID: Max. 3T
Sintering Stroke 100 mm
Vacuum Chamber ·Vertical vacuum Chamber
·Inner Double Layers Stainless Steel Reflectors
·Rotary Pump included
Max Vacuum Level
(Room Temperature) · 10 Pa (7.5 x 10^-2 torr) with the mechanical pump
·One double stage mechanical pump is included
·1 Pa ( 10x10-4 torr ) with optional turbo pump ( click picture below right to order )

Pressure Control System PLC
Pressure Stability ≤±0.1MPa
Pressure Rising Rate ≤2Pa/hr
Max Heating Rate 300ºC/min
Safety Devices Emergency Stop System and Warning Alarm System
Water Cooling 58L/minute recirculating water chiller is included fro cooling pushing head

Standard Accessories ·SPS Sintering Graphite Die Set
·Graphite Spacer
·K & B typeThermal Couples
·O-rings
·Clamping Tool
Dimension ·Power Supply :760 L X 460 W X 1820 H, mm
·Furnace: 970 L X 720 W X 1400 H, mm
Compliance ·CE certified
·NRTL certification is available upon request at the extra cost
Warranty: ·One year limited warranty