Spark Plasma Sintering Furnace (SPS) upto 20 Ton pressure and 1600ºC - YLJ-SPS-T20
YLJ-SPS-T20 is a Spark Plasma Sintering System is designed for a wide range of material research upto 1600ºC. It can be used for sintering, sinter-bonding, surface treatment, and synthesis. The sample material can be metals, ceramics, nanostructured material and amorphous material. This system is perfectly fit solid electrolyte and electric thermal material research.

Configuration

Stainless Steel Chamber - Suitable for Controlled Inert Gas or Vacuum Condition
Sintering Press Unit
Sintering DC Pulse Generator
Vacuum Unit
Sintering Control Unit
Power 20 KVA
Input Voltage AC220V 50/60 Hz Three Phases
Output Current DC 0 - 1500 A (Digital Controlled)
Output Voltage DC 0 - 10 V (Digital Control)
Pulse Frequency 5 - 255 ms Adjustable
2 - 1000 Hz adjustable
Maximum Temperature 1200ºC with K-type thermal couple
1600ºC with B-type thermal couple
Two types of thermal couple are included
Temperature controller

Precision Eurotherm temperature controller is built in
Overshooting temperature is less than 5ºC at the feast heating rate
Temperature accuracy : < 0.1ºC
Hydraulic Press

Manual operated hydraulic press to apply pressure.
Max pressure: 20 T
Digital Pressure gauge is built in with over-pressure alarm.
Sintering Die Set Dimension

OD. 85- 100 mm diameter made of HIP graphite in Japan
ID: 20 mm - 50 mm
Sintered Sample size :20-50 mm depended on sintering temperature.
Made of high purity graphite by HIP processing, Max. Pressure for the die is 50 MPa, and Max. Load from the hydraulic press is dependent on die 's ID
0.5"ID Max. 0.5T
1.0 ID: Max. 3T
Sintering Stroke 100 mm
Vacuum Chamber Vertical vacuum Chamber
Inner Double Layers Stainless Steel Reflectors
Rotary Pump included
Max Vacuum Level
(Room Temperature) 10 Pa (7.5 x 10^-2 torr) with the mechanical pump
One double stage mechanical pump is included
1 Pa ( 10x10-4 torr ) with optional turbo pump
Pressure Control System PLC
Pressure Stability ≤±0.1MPa
Pressure Rising Rate ≤2Pa/hr
Max Heating Rate 300ºC/min
Safety Devices Emergency Stop System and Warning Alarm System
Water Cooling 58L/minute recirculating water chiller is included fro cooling pushing head
Dimension Power Supply :760 L X 460 W X 1820 H, mm
Furnace: 970 L X 720 W X 1400 H, mm
Compliance CE certified
Warranty: One year limited warranty