Description of Vacuum Melt Spinning System

A lab-scale vacuum melt spinning system for preparing amorphous metallic ribbons. In this technique, metal ingots (<50g) are melted via induction heating method and then propelled by over-pressurizing the crucible.

Specification of Vacuum Melt Spinning System:
Feature The complete system consists of the stainless steel vacuum chamber, vacuum system, induction heating system, rack system and discharging tubular collector.
Copper roller linear speed: 5 ~ 60m / S
Melting metallic samples: 5g ~ 50g/Per batch
Vacuum casting device (not included in standard configuration)
Power supply Voltage: AC380V, three-phase
Maximum power 15kw (60A air switch required)
Vacuum chamber & vacuum pump Vacuum chamber size: Φ 500mm x 400mm L
Hinged cavity door with quartz observation window
Molecular pump system is installed in the equipment
Vacuum: 5 X10 E-5 Torr (within 20 minutes)
Limiting vacuum 10e-7 Torr (to be baked)

Induction heater & temp Controller Heating power: 15kw; frequency range: 30 ~ 80kHz
Melting sample quantity: 10 - 50g (depending on the material)
Accurate temperature control system, B-type thermocouple, 30 temperature rise and fall procedures can be set
Temperature control accuracy: + / - 2 ºC
Crucibles Quartz crucible or BN crucible can be used according to customers' requirements

Spinning wheel Standard copper roller cooling without water
Linear speed of copper roller: 5 ~ 60m / S
Optional:
Optional water-cooled copper roller with a maximum sample handling capacity of 500g
Optional vacuum casting module


Optional accessories Casting accessories (casting, spray casting) can be purchased according to requirements
The water cooling system can be customized for the casting copper mold according to the requirements

Dimension 2000×1100×1800mm(L×W×H)
Weight ~800Kg
Certificate CE certification