Introduction of Ultrasonic Metal Spot Welder:
Ultrasonic battery tabs metal spot welder is commonly used for metal welding in the winding and lamination process. It has the characteristics of small size, beautiful appearance, convenient operation, firm structure, stable and safe use and so on.

Main features of Ultrasonic Metal Spot Welder:
* Touch screen interface, intuitive and convenient, automatic frequency tracking.
* No oxidation marks, ultrasonic wave has cleaning function, metal surface has dirt or oxides, no surface treatment, can also be perfectly welded.
* All workpieces do not need to be pre-processed, and can be welded without soldering and welding oil additives, which is economical and convenient.
* The welding head is made of wear-resistant material, with long-lasting durability.
* The internal resistance of the solder joint is small. After welding, the conductivity is good, and its resistivity is extremely low, close to zero.
* The welding time is very short, generally can be completed in 0.01-2 seconds instant welding.
* The solder spot is firm, the temperature during working does not exceed its annealing temperature, does not change the metallurgical structure of the workpiece, its welding strength is stronger than other methods of welding, and the welding interface is neat and clean.
* Low welding cost, fast speed, easy operation and convenient maintenance.
* No sparks are produced during welding, the operator is safe and assured, there is no smoke smell, and it will not cause air pollution.

Technical parameters of Ultrasonic Metal Spot Welder:
Application Common use in welding copper and aluminum
Working voltage AC220V / 50Hz
Working air pressure 0.5 ~ 0.7Mpa
Ultrasonic frequency 40KHz (automatic tracking)
Power 1000W (adjustable)
Welding time 0 ~ 1s
Welding Layer Within 20 layers
Drive form Pneumatic
Weight About 60Kg
Control box size L360 * W480 * H200mm
Generator size L200 * W460 * H270mm