24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera
IEEE802.3af Passive Poe Injector 48V 15W For Ip Camera An IEEE standard for powering network devices via Ethernet cable. Also known as "Power-over-Ethernet" (PoE), the 802.3af specification provides 48 volts over 4-wire or 8-wire twisted pair. The 8-wire cable uses one twisted pair for the power...
IEEE802.3af Passive Poe Injector 48V 15W For Ip Camera
An IEEE standard for powering network devices via Ethernet cable. Also known as "Power-over-Ethernet" (PoE), the 802.3af specification provides 48 volts over 4-wire or 8-wire twisted pair. The 8-wire cable uses one twisted pair for the power, while the 4-wire transmits the power over the same pair as the data, but uses different frequencies. Designed for such devices as IP phones, cameras and Wi-Fi access points, 802.3af allows them to be placed in locations that have no electrical outlets. Only the Ethernet cable needs to be connected.
(Power Over Ethernet) Distributing power over an Ethernet network. Because the power and signal are on the same cable, PoE enables remote network devices such as ceiling-mounted access points, surveillance cameras and LED lighting to be installed far away from AC power sources.
A PoE switch creates a PoE network, which supports both PoE and regular non-Poe devices. With adapters, PoE devices can be added to an existing Ethernet network . Using at least Cat 5 cable, electricity is transmitted over unused wires in eight-wire cables and over signal wires in four-wire cables.
Product Parameters
Type EN15G-24-2
Input 100-240Vac 0.5A
Output 24V 0.64A
Regulatory Compliance passive
RoHS Compliance
WEEE Compliance
Pass Through Data Rates
10/100/1000 Mbps
Output Power Voltage 24V
User Port Power 15W Guaranteen
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
IP Rated IP40
Size 85*46*30mm
Weight 100g(0.27lb)
What is the difference between 802.3 AF and 802.3 at?
The big difference between 802.3af (PoE) and 802.3at (PoE+) is the amount of power delivered over each standard. 802.3af (PoE) can deliver 15.4 watts over Cat5 cables. 802.3at (PoE+) can deliver up to 30 watts over Cat 5 cables with 25.5 watts available to devices
Company Introduction:
PROCET(Creative Lianjie Network Technology Co.,Ltd) estblished in 2000. PROCET mainly R&D on the PoE (Power over Ethernet) series product, Outdoor PoE, indoor PoE, Lightning&surge protection PoE, -40℃ to +65℃ PoE, PoE splitter, PoE extender. We registered PROCET Technology Co., Ltd in HONGKONG in 2019.
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 0
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 1
Certification:
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 2
Production quality assurance:
We keeped our stable production workers, four QC with at least 4 years experience to make sure the production.
We have aging testing, high-low temperature testing, surge testing, drop testing, swing testing before delivery.
We have CCC, CE,FCC,UL,TUV certification for our PoE.
FAQ:
(1) Lead Time?
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
(2) How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
(3) OEM/ODM Services?
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.
Shipping:
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 324V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 4
An IEEE standard for powering network devices via Ethernet cable. Also known as "Power-over-Ethernet" (PoE), the 802.3af specification provides 48 volts over 4-wire or 8-wire twisted pair. The 8-wire cable uses one twisted pair for the power, while the 4-wire transmits the power over the same pair as the data, but uses different frequencies. Designed for such devices as IP phones, cameras and Wi-Fi access points, 802.3af allows them to be placed in locations that have no electrical outlets. Only the Ethernet cable needs to be connected.
(Power Over Ethernet) Distributing power over an Ethernet network. Because the power and signal are on the same cable, PoE enables remote network devices such as ceiling-mounted access points, surveillance cameras and LED lighting to be installed far away from AC power sources.
A PoE switch creates a PoE network, which supports both PoE and regular non-Poe devices. With adapters, PoE devices can be added to an existing Ethernet network . Using at least Cat 5 cable, electricity is transmitted over unused wires in eight-wire cables and over signal wires in four-wire cables.
Product Parameters
Type EN15G-24-2
Input 100-240Vac 0.5A
Output 24V 0.64A
Regulatory Compliance passive
RoHS Compliance
WEEE Compliance
Pass Through Data Rates
10/100/1000 Mbps
Output Power Voltage 24V
User Port Power 15W Guaranteen
AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
IP Rated IP40
Size 85*46*30mm
Weight 100g(0.27lb)
What is the difference between 802.3 AF and 802.3 at?
The big difference between 802.3af (PoE) and 802.3at (PoE+) is the amount of power delivered over each standard. 802.3af (PoE) can deliver 15.4 watts over Cat5 cables. 802.3at (PoE+) can deliver up to 30 watts over Cat 5 cables with 25.5 watts available to devices
Company Introduction:
PROCET(Creative Lianjie Network Technology Co.,Ltd) estblished in 2000. PROCET mainly R&D on the PoE (Power over Ethernet) series product, Outdoor PoE, indoor PoE, Lightning&surge protection PoE, -40℃ to +65℃ PoE, PoE splitter, PoE extender. We registered PROCET Technology Co., Ltd in HONGKONG in 2019.
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 0
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 1
Certification:
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 2
Production quality assurance:
We keeped our stable production workers, four QC with at least 4 years experience to make sure the production.
We have aging testing, high-low temperature testing, surge testing, drop testing, swing testing before delivery.
We have CCC, CE,FCC,UL,TUV certification for our PoE.
FAQ:
(1) Lead Time?
Order samples, we have in stock.
Bigger orders, 2-4 weeks after payment.
(2) How to buy?
Click the BLUE BUTTON "Inquire now" (in the middle of page), input your order info and send to us.
Your sales consultant will contact you with 24 hr.
(3) OEM/ODM Services?
YES. Tell us your demand, get the products you want.
For distributors, we can put your labels on it too.
Shipping:
24V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 324V 15W Passive IEEE802.3AF Poe Injector For Ip Camera 4