Cell Phone Single Band WCDMA Signal Booster Customized Grey Color



Cell Phone Booster Mobile Signal Repeater Ampilifier Single Band WCDMA



Products Spect:

Product Description
GlobaL application ATNJ factory 2100MHz 3G signal repeater for your selection:
WCDMA 2100MHz 2G/3G Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.

Technical Specifications



Specifications

Parameters

Frequency Range (Customers to Choose)

Uplink

1920-1980MHz

Downlink

2110-2170MHz

Frequency Bandwidth (3dB Bandwidth)

30MHz

Gain

80dB

Automatic gain control (Step Attenuation)

31dB @ 1dB/ Step

Auto Gain Control

20dB Min.

Output Power(Customers to Choose)

27dBm

Spurious Emission

≤ -15dBm/30kHz

9kHz~1GHz: ≤ -36dBm/30kHz

1GHz~12.75GHz: ≤ -30dBm/30kHz

Inter-Modulation Attenuation ACPR

≤ -40dBc / 30kHz (measured under rated output power)

In-band Ripple

≤ 3dB

VSWR

<=2

I/O Impedance

50 Ω

Noise Figure

≤ 5dB

System Delay

≤ 5μs

Network

3G

Trademark

ATNJ









Product Description
Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 0
Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 1Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 2Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 3Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 4Cell Phone Single Band WCDMA Signal Booster Customized Grey Color 5