PRODUCT DESCRIPTION
3Phase 100KW Natural Gas CHP Synchro CHP RPM1500

Natural gas solely used for heating or electricity generation can not maximum the utilization of natural gas.From the heating point of view, heating from natural gas combustion leads to low energy utilization because the maximum combustion temperature for natural gas is above 2000°C, but the required temperature from heating is 200-300°C only and even 50-70°C. The big temperature difference brings great energy loss. Sevenpower use the special designed heat exchanger recover heat from exhaust gas which the temperature is about 560°C high, and make it drop between 100 to 130°C,at the same time, the engine jacket water heat is recovered too, the efficiency of natural gas utilization is greatly improved.

Production Service
-Keep customers posted on the progress of production.
-Systematical and strict testing before delivering to customers
-Testing

Including 0%,25%,50%, 75%, 100%, 110% load
Emergency stop
All protections(high temperature, low oil pressure, over speed, over load, over frequency and phase failure etc.)
Electrical and thermal power output
Synchronization
Natural gas CHP SP100N/24hours Continuous Electrical Output 100kw

Main Characters


Model SP110N
fuel — Natural Gas
marks — Synchro CHP
electrical output(KWe) kVA/kWe Continuous Power
125/100
thermal output(KWe) kWt 171
electrical efficiency % 30.8%
thermal efficiency % 52.7%
overall efficiency % 83.5%
frequency Hz 50
voltage V 400/230
gas inlet pressure kPa 3-5
dimension (soundproof type) mm*mm*mm 2600*1550*1650
net weight kg 2700
NG consumption m3/kW.h 0.296
db(A)@7m — 58
Certificate — CE
water-water heat exchanger — SWEP
water-exhaust heat exchanger — designed by our own factory/made of full stainless steel
ignition system — Impco
speed governor — Woodward
mixer — Venturi type
gas filter — Madas
zero regulator — Kromschroeder
solenoid valve — Kromschroeder
gas pressure gauge — Dungs
Lambda auto control — Available on request with extral cost
catalyst converter — Available on request with extral cost
MCB — ABB
GCB — ABB
Controller ComAp
Engine model — SP-6CTA
Engine type — 6 cylinders,4stroke,water-coolled
RPM — 1500
Compression Ratio — 10.5
Displacement — 8.3L
Oil capacity — 19L
Charging voltage — 24V(DC)
Charging current — 5A(DC)
Starting system — Electic-start
Alternator model — Meccalte
phase — 3 phase 4 wires
insulation system — class H
protection — IP23
Cooling Type — air cooled

Optional at

Leroy Somer or Faraday Or Stamford alternator
ComAp or Deepsea or SmartGen controller
Off-grid or Mains parallel.
CHPs in parallel
Emissions(NOx and CO)
Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 0

3 Different Applications
Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 1























Picture for reference

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 2



SevenPower 100KW Natural Gas CHP On Site Picture(Europe)
Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 3

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 4

For more information about each CHP, please consult with your sales representative.Thanks.



Our Packing

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 5

Our Hannover Exhibition

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 6

Our Showroom In Germany

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 7



Our Customers' Visiting

Continuous 100KW Natural Gas CHP , Synchro CHP Cogeneration Systems Super Silent Running 8